| ID Number | M24529 |
| Model | 226D3 |
| Model Year | 2024 |
| Serial Number | 0EK502646 |
| Location | STOCKTON 1521 |
The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
| Gross Power - SAE J1995 | 67.1hp |
| Net Power - SAE 1349 | 65.8hp |
| Displacement | 134.3in³ |
| Stroke | 3.9in |
| Bore | 3.3in |
| Engine Model | Cat C2.2 CRDI |
| Peak Torque - 1,500 rpm - SAE J1995 | 153ft·lbf |
| Net Power - ISO 9249 | 66.5hp |
| Rated Operating Capacity | 1550lb |
| Rated Operating Capacity with Optional Counterweight | 1650lb |
| Tipping Load | 3100lb |
| Breakout Force - Tilt Cylinder | 3927lb |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
| Operating Weight | 5849lb |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
| Wheel Base | 41.5in |
| Length - With Bucket on Ground | 127.3in |
| Length - Without Bucket | 99.4in |
| Height - Top of Cab | 79.8in |
| Vehicle Width over Tires | 58.9in |
| Maximum Overall Height | 143.8in |
| Bucket Pin Height - Maximum Lift | 110.9in |
| Bucket Pin Height - Carry Position | 8.5in |
| Reach - Maximum Lift/Dump | 21in |
| Clearance at Maximum Lift and Dump | 81.8in |
| Ground Clearance | 6.9in |
| Departure Angle | 27.9° |
| Maximum Dump Angle | 46.7° |
| Rack Back Angle - Maximum Height | 88.9° |
| Bumper Overhang - Behind Rear Axle | 35.2in |
| Turning Radius from Center - Bucket | 77.8in |
| Maximum Reach - With Arms Parallel to Ground | 50.7in |
| Turning Radius from Center - Machine Rear | 59.6in |
| Turning Radius from Center - Coupler | 43.5in |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| Chain Box - Each Side | 1.8gal (US) |
| Cooling System | 3.2gal (US) |
| Engine Crankcase | 2.6gal (US) |
| Fuel Tank | 15.1gal (US) |
| Hydraulic System | 11.9gal (US) |
| Hydraulic Tank | 9gal (US) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336psi |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33.5hp |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9hp |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 18gal/min |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26gal/min |
| Travel Speed - Forward or Reverse - One Speed | 7.6mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | 11.1mile/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Outside Cab*** | 102dB(A) |
| Inside Cab** | 83dB(A) |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
| Electrical |
|
| Operator Environment |
|
| Power Train |
|
| Other |
|
| Mandatory Equipment |
|
| Optional Equipment |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 226D3 (CANOPY), the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
226D3 Skid Steer Loader