Make a Selection
Maximum Gross Power
Maximum Gross Torque - SAE J1995
Rated Net Power - ISO 9249
Maximum Gross Torque - ISO 14396
Rated Net Power - ISO 9249 (DIN)
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - SAE J1995
Rated Net Power - Rated Engine Speed
Rated Net Power - SAE J1349
Maximum Gross Power - ISO 14396
Maximum Gross Power - Maximum Engine Speed
Maximum Gross Power - ISO 14396 (DIN)
Cat C4.4 ACERTï¿½
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
1.3-1.9 m3 (1.7-2.5 yd3)
Rated Bucket Capacity
ISO 3449:2005 Level II
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
*The measurements were conducted with the cab doors and windows closed.
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Service Refill Capacities
Axles - Front Center Differential
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
Hydraulic System - Including Tank
Diesel Exhaust Fluid (DEF) Tank
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
Maximum Working Pressure - Implement Pump
Hydraulic Cycle Time - Dump, at Maximum Reach
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
Maximum Flow - Implement Pump
Relief Pressure - Tilt Cylinder
Hydraulic Cycle Time - Rackback
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
Hydraulic Cycle Time - Total Cycle Time
Maximum Flow - Steering Pump
Steering Articulation Angle - Each Direction
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
Maximum Working Pressure - Steering Pump
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
Forward and Reverse - High Range
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1*
Forward and Reverse - Low Range, Speed Range 2*
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - SAE J1349
Maximum Net Torque - ISO 9249
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportï¿½
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Fixed; Locking differential (standard)
Oscillating ï¿½11 degrees; Locking differential (Standard)