The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
Machines prices vary by included features. If you would like more information about the machine details please contact us today by clicking "Request a Quote".
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
121HP
Weights
Operating Weight
21742lb
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Service Refill Capacities
Transmission
0.8gal (US)
Engine Crankcase
2.6gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)
Axles - Rear
4.5gal (US)
Cooling System
5.7gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Axles - Front
4.5gal (US)
Fuel Tank
43.6gal (US)
Hydraulic Tank
14.5gal (US)
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cab
ROPS
ISO 3471:2008
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4641psi
Maximum Working Pressure - Implement Pump
4061psi
Hydraulic Cycle Time - Total Cycle Time
11.5s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25gal/min
Maximum Flow - Implement Pump
43.6gal/min
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7s
Note
All cycle times listed are with cylinder snubbing turned off.
Hydraulic Cycle Time - Rackback
2.2s
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40gal/min
Steering
Maximum Working Pressure - Steering Pump
3190psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3s
Steering Articulation Angle - Each Direction
40°
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4turns
Maximum Flow - Steering Pump
21.7gal/min
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Share this Product
920 Compact Wheel Loader