The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Maximum Gross Power | 168hp |
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588ft·lbf |
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 162mhp |
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | 168hp |
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156hp |
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573ft·lbf |
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163hp |
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586ft·lbf |
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166mhp |
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170mhp |
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | 160hp |
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601ft·lbf |
Displacement (Performance Power Mode: Speed Range 1-4) | 427in³ |
Displacement (Standard Power Mode: Speed Range 1-3*) | 427in³ |
Engine Model | Cat C7.1** |
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158mhp |
Note (1) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
Note (2) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
Note (3) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
Note (4) | **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards. |
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164hp |
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | 587ft·lbf |
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | 572ft·lbf |
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156hp |
Operating Weight | 28193lb |
Bucket Capacities | 1.9-5.0 m3 (2.5-6.5 yd3) |
Bucket Capacities - General Purpose | 1.9-2.5 m³ (2.5-3.2 yd³) |
Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level II |
Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Engine Crankcase | 5.3gal (US) |
Fuel Tank | 51.5gal (US) |
Front Axles | 6.9gal (US) |
Rear Axles | 6.6gal (US) |
Cooling System | 7.9gal (US) |
Transmission - Gear Box | 2.2gal (US) |
Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
Hydraulic Tank | 23.8gal (US) |
Hydraulic System - Including Tank | 42.3gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | 10.5s |
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | 9.5s |
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | 2.6s |
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.6s |
Maximum Flow - Implement Pump | 40gal/min |
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | 6.2s |
Maximum Working Pressure - Implement Pump | 3771psi |
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | 1.7s |
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | 1.5s |
Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 40gal/min |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061psi |
Note (1) | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. |
Relief Pressure - Tilt Cylinder | 4061psi |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771psi |
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5s |
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 40gal/min |
Note (1) | European Union Directive “2000/14/EC.” |
Average Exterior Sound Pressure (ISO 6395:2008) | 101dB(A) |
Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
Maximum Flow - Steering Pump | 34gal/min |
Maximum Working Pressure - Steering Pump | 3500psi |
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | 2.4s |
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5turns |
Maximum Steering Torque - 0° (Straight Machine) | 37155ft·lbf |
Maximum Steering Torque - 40° (Full Turn) | 27747ft·lbf |
Steering Articulation Angle - Each Direction | 40° |
Forward and Reverse - Range 4 | 25mile/h |
Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
Forward and Reverse - Range 2 | 8mile/h |
Forward and Reverse - Range 3 | 17mile/h |
Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). |
Front | Fixed; Locking differential (standard) |
Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) |
Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
Other Choices Include | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture |
Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Standard Size | 20.5 R25, radial (L-3) |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Recyclability | 94% |
Power Train |
|
Hydraulics |
|
Electrical |
|
Operator Environment |
|
Other Standard Equipment |
|
Optional Equipment |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 926M , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
926M Small Wheel Loader