Cat® wheel loaders set the standard for productivity, fuel efficiency, operator comfort and low operating costs. The Cat 930 Small Wheel Loader features a high torque C7.1 engine that works in conjunction with an intelligent hydrostatic power train to deliver exceptional fuel efficiency. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, designed to manage itself so you can concentrate on your work. Extended service intervals to 1000 hours reduce fluid and filter use by up to 45% (compared to previous M Series models) while keeping operating cost low.
| Rated Gross Power - SAE J1995 | 170hp |
| Engine Model | Cat C7.1* |
| Performance Mode | Automatic |
| Rated Gross Power - Rated Engine Speed | 1800r/min |
| Rated Gross Power - SAE J1995 (DIN) | 172mhp |
| Rated Engine Power - ISO 14396 | 168hp |
| Rated Engine Power - ISO 14396 (DIN) | 170mhp |
| Rated Net Power - SAE J1349 at Minimum Fan Speed | 165hp |
| Rated Net Power - ISO 9249 at Minimum Fan Speed | 165hp |
| Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed | 167mhp |
| Maximum Gross Torque - Engine Speed | 1400r/min |
| Maximum Gross Torque - SAE J1995 | 608ft·lbf |
| Maximum Gross Torque - ISO 14396 | 601ft·lbf |
| Maximum Net Torque - SAE J1349 | 593ft·lbf |
| Maximum Net Torque - ISO 9249 | 595ft·lbf |
| Displacement | 427in³ |
| Bore | 4in |
| Stroke | 5in |
| Note | *Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards. |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Operating Weight | 31124lb |
| Operating Weight - High Lift | 31633lb |
| Bucket Capacities | 1.9-5.0 m3 (2.5-6.5 yd3) |
| Standard Size | 20.5 R25, radial (L-3) |
| Other Choices Include | 20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 LEVEL II |
| Front | Fixed; Locking differential (standard) |
| Rear | Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons). |
| Operator Sound Pressure (ISO 6396:2008) | 68dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101dB(A) |
| Note (1) | European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Recyclability | 95% |
| Height - Ground to Cab** | 10.92ft |
| Height - Ground to Beacon** | 12.17ft |
| Height - Ground to Axle Center** | 2.25ft |
| Height - Ground Clearance** | 1.33ft |
| Length - Overall* | 24.67ft |
| Length - Rear Axle to Bumper | 6.5ft |
| Length - Hitch to Front Axle | 4.92ft |
| Length - Wheel Base | 9.83ft |
| Clearance - Bucket at 45°* | 9.25ft |
| Clearance - Load over Height** | 10.9ft |
| Clearance - Level Bucket** | 11.75ft |
| Height - Bucket Pin** | 12.83ft |
| Height - Overall** | 16.9ft |
| Reach - Bucket at 45°* | 3.5ft |
| Carry Height - Bucket Pin | 1.25ft |
| Dig Depth** | 3.9in |
| Width - Bucket | 8.33ft |
| Width - Tread Center | 6.33ft |
| Turning Radius - Over Bucket | 19.5ft |
| Width - Over Tires | 8.33ft |
| Turning Radius - Outside of Tires | 17.75ft |
| Turning Radius - Inside of Tires | 9.33ft |
| Rack Angle at Full Lift | 54° |
| Dump Angle at Full Lift | 49° |
| Rack Angle at Carry | 43° |
| Departure Angle | 33° |
| Articulation Angle | 40° |
| Operating Weight | 31124lb |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
| Height - Ground to Cab** | 10.92ft |
| Height - Ground to Beacon** | 12.17ft |
| Height - Ground to Axle Center** | 2.25ft |
| Height - Ground Clearance** | 1.33ft |
| Length - Overall* | 27.3ft |
| Length - Rear Axle to Bumper | 6.5ft |
| Length - Hitch to Front Axle | 4.92ft |
| Length - Wheel Base | 9.83ft |
| Clearance - Bucket at 45°* | 11.25ft |
| Clearance - Load over Height** | 11.58ft |
| Clearance - Level Bucket** | 13.67ft |
| Height - Bucket Pin** | 14.75ft |
| Height - Overall** | 18.83ft |
| Reach - Bucket at 45°* | 4.58ft |
| Carry Height - Bucket Pin | 2.08ft |
| Dig Depth** | 5.3in |
| Width - Bucket | 8.33ft |
| Width - Tread Center | 6.33ft |
| Turning Radius - Over Bucket | 20.75ft |
| Width - Over Tires | 8.33ft |
| Turning Radius - Outside of Tires | 17.75ft |
| Turning Radius - Inside of Tires | 9.33ft |
| Rack Angle at Full Lift | 53° |
| Dump Angle at Full Lift | 48° |
| Rack Angle at Carry | 49° |
| Departure Angle | 33° |
| Articulation Angle | 40° |
| Operating Weight | 31633lb |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
| Steering Cylinder - Bore Diameter | 2.8in |
| Steering Cylinder - Rod Diameter | 1.6in |
| Steering Cylinder - Stroke | 17.2in |
| Maximum Flow - Steering Pump | 34gal/min |
| Maximum Working Pressure - Steering Pump | 3500psi |
| Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited | 2.8s |
| Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed | 2.4s |
| Maximum Flow - Implement Pump | 50gal/min |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50gal/min |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42gal/min |
| Maximum Working Pressure - Implement Pump | 3771psi |
| Relief Pressure - Tilt Cylinder | 4061psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061psi |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | 4.7in |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | 2.6in |
| Lift Cylinder: Standard Lift Linkage - Stroke | 28.7in |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | 5.9in |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | 3.5in |
| Tilt Cylinder: Standard Lift Linkage - Stroke | 21.9in |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.1s |
| Hydraulic Cycle Time - Dump (at Maximum Lift Height) | 1.5s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 2.7s |
| Hydraulic Cycle Time - Total Cycle Time | 9.3s |
| Note | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
| Fuel Tank | 51.5gal (US) |
| Cooling System | 7.9gal (US) |
| Engine Crankcase | 5.3gal (US) |
| Transmission - Gear Box | 2.2gal (US) |
| Front Axles | 6.9gal (US) |
| Rear Axles | 6.6gal (US) |
| Hydraulic System - Including Tank | 43.6gal (US) |
| Hydraulic Tank | 23.8gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
| Note | DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019. |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 | 8mile/h |
| Forward and Reverse - Range 3 | 17mile/h |
| Forward and Reverse - Range 4 | 25mile/h |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
| Operator Environment |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Other |
|
| Operator Environment |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Other Optional Equipment |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 930 , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
930 Small Wheel Loader