The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
| Maximum Gross Power | 168HP |
| Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156HP |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588ft·lbf |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170mhp |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | 168HP |
| Displacement (Performance Power Mode: Speed Range 1-4) | 427in³ |
| Note (2) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601ft·lbf |
| Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158mhp |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | 160HP |
| Engine Model | Cat C7.1** |
| Displacement (Standard Power Mode: Speed Range 1-3*) | 427in³ |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573ft·lbf |
| Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163HP |
| Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166mhp |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586ft·lbf |
| Note (3) | **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards. |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 162mhp |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | 587ft·lbf |
| Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164HP |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | 572ft·lbf |
| Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156HP |
| Operating Weight | 31382lb |
| Bucket Capacities | 2.1-5.0 m3 (2.7-6.5 yd3) |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) |
| Bucket Capacities - General Purpose | 2.1-2.7 m³ (2.7-3.5 yd³) |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | 2.4s |
| Maximum Steering Torque - 40° (Full Turn) | 27747ft·lbf |
| Maximum Flow - Steering Pump | 34gal/min |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5turns |
| Maximum Working Pressure - Steering Pump | 3500psi |
| Maximum Steering Torque - 0° (Straight Machine) | 37155ft·lbf |
| Steering Articulation Angle - Each Direction | 40° |
| Hydraulic System - Including Tank | 43.6gal (US) |
| Hydraulic Tank | 23.8gal (US) |
| Rear Axles | 6.6gal (US) |
| Transmission - Gear Box | 2.2gal (US) |
| Front Axles | 6.9gal (US) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Fuel Tank | 51.5gal (US) |
| Engine Crankcase | 5.3gal (US) |
| Cooling System | 7.9gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | 2.7s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | 5.7s |
| Note (1) | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771psi |
| Maximum Working Pressure - Implement Pump | 3771psi |
| Relief Pressure - Tilt Cylinder | 4061psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061psi |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42gal/min |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | 1.5s |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.1s |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.7s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | 10.1s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | 1.7s |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | 9.3s |
| Maximum Flow - Implement Pump | 50gal/min |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50gal/min |
| Note (1) | European Union Directive “2000/14/EC” |
| Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101dB(A) |
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) |
| Front | Fixed; Locking differential (standard) |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 4 | 25mile/h |
| Forward and Reverse - Range 3 | 17mile/h |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). |
| Forward and Reverse - Range 2 | 8mile/h |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Other Choices Include | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires |
| Standard Size | 20.5 R25, radial (L-3) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Recyclability | 94% |
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Operator Environment |
|
| Other Standard Equipment |
|
| Optional Equipment |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 930M , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
930M Small Wheel Loader