ID Number | M24557 |
Model | 938 |
Model Year | 2024 |
Serial Number | 0EZY00806 |
Location | STOCKTON 1521 |
The Cat® 938 sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Maximum Gross Power | 188hp |
Bore | 4in |
Stroke | 5in |
Displacement | 427in³ |
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 664ft·lbf |
Engine Model | Cat® C7.1 |
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 642ft·lbf |
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 188hp |
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800r/min |
Maximum Rated Gross Power - ISO 14396 | 188hp |
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600r/min |
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 649ft·lbf |
Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 173hp |
Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. |
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 627ft·lbf |
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 650ft·lbf |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 186hp |
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 184hp |
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 190hp |
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 183hp |
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 170hp |
Net Power (Standard Power Mode: Range 1-3*) | 1600r/min |
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 176hp |
Net Power (Performance Power Mode: Range 1-4) | 1800r/min |
Maximum Rated Gross Power - ISO 14396 (metric) | 190hp |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 172hp |
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 628ft·lbf |
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 170hp |
Operating Weight | 36839lb |
Note (2) | ^Aggregate Handler equipped with full counterweight, optional guards, roading fenders, cold start package, and 23.5R25 tires. |
Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
Operating Weight (2) | 16 710 kg (36,839 lb)^ |
Operating Weight (1) | 16 199 kg (35,712 lb)** |
Bucket Capacities | 2.9-5.0 m3 (3.8-6.5 yd3) |
ROPS | ISO 3471:2008 |
Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. |
FOPS | ISO 3449:2005 LEVEL II |
Declared Sound Levels |
Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
Recyclability | 94% |
Maximum Flow - Steering Pump | 34gal/min |
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 3.1s |
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.3s |
Steering Cylinder, Double Acting - Bore Diameter | 3.1in |
Steering Cylinder, Double Acting - Rod Diameter | 2in |
Steering Cylinder, Double Acting - Stroke | 15.7in |
Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
Maximum Working Pressure - Steering Pump | 3500psi |
Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4351psi |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 4061psi |
Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
Tilt Cylinder, Double Acting - Bore Diameter | 5.9in |
Relief Pressure - Tilt Cylinder | 4351psi |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.7/10.6 seconds |
Tilt Cylinder, Double Acting - Rod Diameter | 3.5in |
Maximum Flow - Implement Pump | 50gal/min |
Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
Tilt Cylinder, Double Acting - Stroke | 21.9in |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds |
Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42gal/min |
Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
Lift Cylinder, Double Acting - Stroke | 31.1in |
Maximum Working Pressure - Implement Pump | 4061psi |
Lift Cylinder, Double Acting - Bore Diameter | 4.7in |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.7/2.7 seconds |
Lift Cylinder, Double Acting - Rod Diameter | 2.6in |
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50gal/min |
Rear Axles | 9.2gal (US) |
Hydraulic System - Including Tank | 44.9gal (US) |
Hydraulic Tank | 23.8gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
Engine Crankcase | 5.3gal (US) |
Cooling System | 8.5gal (US) |
Front Axles | 9.2gal (US) |
Transmission - Gear Box | 2.9gal (US) |
Fuel Tank | 51.5gal (US) |
Brakes - Parking | Spring applied hydraulically released |
Rear Axle - Traction Aid - Optional | Limited slip differential |
Rear Axle - Oscillation Angle by Tire Size - 23.5 R25 | ± 7 degrees |
Rear Axle | Oscillating |
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees |
Note (2) | Offset rims available to meet European roading requirements. |
Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
Brakes - Service | Outboard wet disc |
Note (3) | *Differential front locking axle can be engaged on the go at full torque to 20 km/h (12.4 mph) on the 938M. |
Front Axle | Fixed |
Front Axle - Traction Aid* | Locking differential (standard) |
Forward and Reverse - Range 4 | 25mile/h |
Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
Forward and Reverse - Range 2 | 8mile/h |
Forward and Reverse - Range 3 | 17mile/h |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
Full Turn Tip Load (2) | 10 662 kg (23,504 lb)^ |
Full Turn Tip Load (1) | 10 551 kg (23,260 lb)** |
Note (2) | ^Aggregate Handler equipped with full counterweight, optional guards, roading fenders, cold start package, and 23.5R25 tires. |
Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. |
Power Train |
|
Hydraulics |
|
Electrical |
|
Operator Environment |
|
Other Standard Equipment |
|
Cab, Deluxe (standard In Europe): |
|
Optional Equipment |
|
Cold Start Package: |
|
Guards |
|
Radio Packages: |
|
Seats: |
|
Steering: |
|
Tires: |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 938M Aggregate Handler (CAB), the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
938 Small Wheel Loader