The Cat® 950 Wheel Loader brings premium performance with simple-to-use technologies, helping to boost operator efficiencies and deliver consistent high bucket fill factors, resulting in highly efficient productivity. Long service intervals help to reduce your downtime. This machine is designed to meet emission standards without interrupting operation, delivering great performance, reliability, durability, and versatility, resulting in a machine that is built to meet your needs.
| Engine Power - 2,100 rpm ISO 14396:2002 | 249hp |
| Engine Power - 2,100 rpm ISO 14396:2002 | 253 hp (metric) |
| Engine Model | Cat® C7.1 |
| Gross Power - 2,100 rpm SAE J1995:2014 | 253hp |
| Gross Power - 2,100 rpm SAE J1995:2014 | 257 hp (metric) |
| Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011 | 235 hp (metric) |
| Engine Torque - 1,300 rpm ISO 14396:2002 | 908lbf·ft |
| Gross Torque - 1,300 rpm SAE J1995:2014 | 916lbf·ft |
| Net Torque - 1,300 rpm ISO 9249:2007, SAE J1349:2011 | 863lbf·ft |
| Displacement | 427in³ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Biodiesel Capability | Up to B20¹ |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | ¹Cat engines are compatible with diesel fuel blended with following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidel |
| Operating Weight | 42461lb |
| Note | Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear |
| Forward - 1 | 4.3mile/h |
| Forward - 2 | 7.5mile/h |
| Forward - 3 | 12mile/h |
| Forward - 4 | 16mile/h |
| Forward - 5 | 24.5mile/h |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 7.5mile/h |
| Reverse - 3 | 16mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Exterior Sound Power Level - ISO 6395:2008 | 107dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69dB(A) |
| Exterior Sound Power Level - ISO 6395:2008² | 104dB(A) |
| Note (1) | ¹Including countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 24694lb |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 26369lb |
| Breakout Force | 40690lbf |
| Note (1) | For a machine configuration as defined under “Weight.” |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Fuel Tank | 68.6gal (US) |
| DEF Tank | 4gal (US) |
| Cooling System | 14.3gal (US) |
| Crankcase | 5.5gal (US) |
| Transmission | 11.4gal (US) |
| Differential - Final Drives - Front | 11.4gal (US) |
| Differential - Final Drives - Rear | 11.4gal (US) |
| Hydraulic Tank | 25.6gal (US) |
| Implement System - Maximum Pump Output at 2,340 rpm | 85gal/min |
| Implement System - Maximum Operating Pressure | 4250psi |
| Hydraulic Cycle Time - Total | 9.1s |
| Height - Top of Hood | 8.83ft |
| Height - Top of ROPS | 11.33ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 23.08ft |
| Hinge Pin Height at Carry Height | 2ft |
| Hinge Pin Height at Maximum Lift | 13.08ft |
| Lift Arm Clearance at Maximum Lift | 10.67ft |
| Rack Back - Maximum Lift | 59° |
| Rack Back - Carry Height | 49° |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Height - Top of Hood | 8.83ft |
| Height - Top of ROPS | 11.33ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 24.58ft |
| Hinge Pin Height at Carry Height | 2.5ft |
| Hinge Pin Height at Maximum Lift | 14.75ft |
| Lift Arm Clearance at Maximum Lift | 11.92ft |
| Rack Back - Maximum Lift | 56° |
| Rack Back - Carry Height | 49° |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Note |
|
| Electrical |
|
| Hydraulics |
|
| Linkage |
|
| Monitoring System |
|
| Safety |
|
| Note |
|
| Additional Equipment |
|
| Electrical |
|
| Hydraulics |
|
| Linkage |
|
| Monitoring System |
|
| Safety |
|
| Special Configurations |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 950 , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
950 Wheel Loader