ID Number | M24539 |
Model | 966 |
Model Year | 2024 |
Serial Number | 0M7R00871 |
Location | STOCKTON 1521 |
The Cat® 966 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering increased productivity. Extended service intervals lower maintenance costs. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.
Engine Power @ 1,600 rpm - ISO 14396:2002 | 321HP |
Gross Power @ 1,600 rpm - SAE J1995:2014 | 325HP |
Engine Model | Cat C9.3B |
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 | 303HP |
Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 | 1255ft-lb |
Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1313lb/ft |
Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1327lb/ft |
Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Displacement | 9.3 L |
Operating Weight | 51124lb |
Note | Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
Bucket Range | 2.8-11.9 m³ 3.75-15.5 yd³ |
Forward - 1 | 4.2mile/h |
Forward - 2 | 8.4mile/h |
Forward - 3 | 15mile/h |
Forward - 4 | 24.5mile/h |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
Reverse - 1 | 4.5mile/h |
Reverse - 2 | 9.2mile/h |
Reverse - 3 | 16.5mile/h |
Reverse - 4 | 24.5mile/h |
Note (1) | ** For machines in European Union countries and in countries that adopt the EU Directives. |
Note (2) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | 108 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 69dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 109dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 76 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 70dB(A) |
With Cooling Fan Speed at Maximum Value - Note | Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
Breakout Force | 38999lb |
Note (1) | For a machine configuration as defined under Weight. |
Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection | 15981kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection | 32727lb |
Cooling System | 17.4gal (US) |
Crankcase | 6.1gal (US) |
DEF Tank | 6.9gal (US) |
Differential - Final Drives - Front | 15.1gal (US) |
Differential - Final Drives - Rear | 15.1gal (US) |
Fuel Tank | 80.1gal (US) |
Hydraulic Tank | 30.1gal (US) |
Transmission | 15.5gal (US) |
Implement System - Maximum Operating Pressure | 4496psi |
Implement System - Maximum Pump Output at 2,250 rpm | 99gal/min |
Hydraulic Cycle Time - Total | 10.1 seconds |
Note | All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
Centerline of Rear Axle to Edge of Counterweight | 8.1ft |
Centerline of Rear Axle to Hitch | 5.1ft |
Ground Clearance | 1.4ft |
Height - Top of Exhaust Pipe | 11.8ft |
Height - Top of Hood | 9.5ft |
Height - Top of ROPS | 11.1ft |
Hinge Pin Height at Carry | 2.6ft |
Hinge Pin Height at Maximum Lift | 15.9ft |
Lift Arm Clearance at Maximum Lift | 13.8ft |
Overall Length - Without Bucket | 26.6ft |
Tread Width | 7.3ft |
Wheel Base | 11.8ft |
Rack Back - Carry Height | 49 degrees |
Rack Back - Maximum Lift | 71 degrees |
Width over Tires (Loaded) | 9.11ft |
Rack Back at Ground | 37 degrees |
Centerline of Rear Axle to Edge of Counterweight | 7.7ft |
Centerline of Rear Axle to Hitch | 5.1ft |
Ground Clearance | 424mm |
Height - Top of Exhaust Pipe | 3531mm |
Height - Top of Hood | 2850mm |
Height - Top of ROPS | 3593mm |
Hinge Pin Height at Carry | 2ft |
Hinge Pin Height at Maximum Lift | 4245mm |
Lift Arm Clearance at Maximum Lift | 3687mm |
Overall Length - Without Bucket | 7399mm |
Tread Width | 7.3ft |
Wheel Base | 3550mm |
Rack Back - Carry Height | 50 degrees |
Width over Tires (Loaded) | 9.11ft |
Rack Back - Maximum Lift | 62 degrees |
Rack Back at Ground | 39 degrees |
Operator Environment |
|
On-board Technologies |
|
Power Train |
|
Hydraulics |
|
Electrical |
|
Monitoring System |
|
Linkage |
|
Operator Environment |
|
On-board Technologies |
|
Power Train |
|
Hydraulics |
|
Electrical |
|
Monitoring System |
|
Linkage |
|
Additional Equipment |
|
Special Configurations |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 966 (CAB), the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
966