The new Cat® 966 GC Wheel Loader is easy to own and operate. It offers low fuel consumption with an on-demand fan, load sensing hydraulics, intuitive controls, and performance series buckets. This machine is built to be just the right machine for a broad range of applications. Great machine performance combined with the low owning and operating costs makes the 966 GC the right choice for your business.
| Engine Power @ 1,600 rpm - ISO 14396:2002 | 321hp |
| Engine Model | Cat C9.3B |
| Gross Power @ 1,600 rpm - SAE J1995:2014 | 325hp |
| Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 | 292hp |
| Net Power - ISO 9249 | 292hp |
| Engine Torque @ 1,200 rpm - ISO 14396:2002 | 1314ft·lbf |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1327ft·lbf |
| Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 | 1234ft·lbf |
| Bore - ISO 9249 | 4.53in |
| Stroke | 5.87in |
| Displacement | 568in³ |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, China Nonroad Stage IV, and Japan 2014 (Tier 4 Final) emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (3) | Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases on a lifecycle basis: • Up to B20 biodiesel (FAME) ** • Up to 100% HVO and GTL renewable fuels |
| Operating Weight* | 48018lb |
| Note (1) | * For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE. |
| Note (2) | * Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Bucket Capacities | 3.2 - 7.1 m³ (4.25 - 9.25 yd³) |
| Static Tipping Load - Full 37° Turn - With Tire Deflection | 30072lb |
| Static Tipping Load - Full 37° Turn - No Tire Deflection | 32233lb |
| Breakout Force | 36974lbf |
| Note (1) | * For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE. |
| Note (2) | * Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 75dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 110dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 78 dB(A)* |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 73dB(A) |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 108 dB(A)*** |
| Note (2) | ** For machines in European Union countries and in countries that adopt the “EU Directives”. |
| Note (3) | *** European Union Directive “2000/14/EC” as amended by “2005/88/EC”. |
| Forward - 1 | 4mile/h |
| Reverse - 1 | 4.3mile/h |
| Forward - 2 | 7.5mile/h |
| Reverse - 2 | 8.2mile/h |
| Forward - 3 | 13mile/h |
| Reverse - 3 | 14.3mile/h |
| Forward - 4 | 21.6mile/h |
| Reverse - 4 | 22.9mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32 in) roll radius. |
| Fuel Tank | 84.5gal (US) |
| DEF Tank | 6.9gal (US) |
| Cooling System | 14gal (US) |
| Crankcase | 6.1gal (US) |
| Transmission | 14.5gal (US) |
| Differential - Final Drives - Front | 15.1gal (US) |
| Differential - Final Drives - Rear | 15.1gal (US) |
| Hydraulic Tank | 26.7gal (US) |
| Implement Pump Type | Variable Displacement Piston, Load Sensing |
| Implement System - Maximum Flow @ 2,275 rpm | 86gal/min |
| Implement System - Maximum Operating Pressure | 4047psi |
| Implement System - Maximum Flow 3rd Function | 63gal/min |
| Implement System - Maximum Operating Pressure 3rd Function | 3304psi |
| Hydraulic Cycle Time - Raise from Carry Position | 5.7s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.6s |
| Hydraulic Cycle Time - Total Cycle Time | 10.1s |
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Brakes | Brakes meet ISO 3450:2011 standards |
| Height - Top of Hood | 9.2ft |
| Height - Top of Exhaust Pipe | 11.61ft |
| B-Pin Height | 13.11ft |
| Height - Top of ROPS | 11.75ft |
| Centerline of Rear Axle to Edge of Counterweight | 8.1ft |
| Ground Clearance | 1.49ft |
| Wheel Base | 11.65ft |
| Centerline of Rear Axle to Hitch | 5.82ft |
| Rack Back - Maximum Lift | 62° |
| Rack Back - Carry | 50° |
| Rack Back - Ground | 42° |
| Lift Arm Clearance | 12.16ft |
| Hydraulic Cycle Time - Dump, at Maximum Raise | 1.8s |
| Recyclability | 97% |
| Note |
|
| Operator Environment |
|
| Power Train |
|
| Linkage |
|
| Hydraulics |
|
| Electrical |
|
| Additional Equipment |
|
| Note |
|
| Operator Environment |
|
| Power Train |
|
| Linkage |
|
| Hydraulics |
|
| Electrical |
|
| Additional Equipment |
|
| Optional Equipment - Note |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 966 GC (CAB), the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
966 GC Wheel Loader