The Cat® 982 Wheel Loader brings premium performance with simple to-use technologies as a standard offering, boosting operator efficiencies and delivering increased productivity. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.
| Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 | 404HP |
| Engine Model | Cat C13 |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1636lb/ft |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1620lb/ft |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | 1515lb/ft |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | 432HP |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | 436HP |
| Operating Weight | 78264lb |
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
| Bucket Range | 4.8-17.2 m³ 6.25-22.5 yd³ |
| Forward - 1 | 3.9mile/h |
| Forward - 2 | 7.4mile/h |
| Forward - 3 | 13.1mile/h |
| Forward - 4 | 23.3mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 8.5mile/h |
| Reverse - 3 | 15mile/h |
| Reverse - 4 | 24.5mile/h |
| Note (1) | ** For machines in European Union countries and in countries that adopt the �EU Directives.� |
| Note (2) | ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | 109 |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 112dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 78 |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
| Breakout Force | 59060lbf |
| Note (1) | For a machine configuration as defined under �Weight.� |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 22418kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 46526lb |
| Cooling System | 13.7gal (US) |
| Crankcase | 9.8gal (US) |
| DEF Tank | 5.5gal (US) |
| Differential - Final Drives - Front | 24.3gal (US) |
| Differential - Final Drives - Rear | 24.3gal (US) |
| Fuel Tank | 112.5gal (US) |
| Hydraulic Tank | 40.4gal (US) |
| Transmission | 20.3gal (US) |
| Implement System - Maximum Operating Pressure | 4975psi |
| Implement System - Maximum Pump Output at 2,250 rpm | 119gal/min |
| Note | All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
| Centerline of Rear Axle to Edge of Counterweight | 9.4ft |
| Centerline of Rear Axle to Hitch | 6.3ft |
| Ground Clearance | 1.4ft |
| Height - Top of Exhaust Pipe | 12.4ft |
| Height - Top of Hood | 10ft |
| Height - Top of ROPS | 12.6ft |
| Hinge Pin Height at Carry | 2.11ft |
| Hinge Pin Height at Maximum Lift | 16.1ft |
| Lift Arm Clearance at Maximum Lift | 13.4ft |
| Overall Length - Without Bucket | 29.11ft |
| Tread Width | 8.4ft |
| Wheel Base | 12.6ft |
| Width over Tires (Loaded) | 11.5ft |
| Centerline of Rear Axle to Edge of Counterweight | 8.9ft |
| Centerline of Rear Axle to Hitch | 6.3ft |
| Ground Clearance | 428mm |
| Height - Top of Exhaust Pipe | 3736mm |
| Height - Top of Hood | 3036mm |
| Height - Top of ROPS | 3801mm |
| Hinge Pin Height at Carry | 2.7ft |
| Hinge Pin Height at Maximum Lift | 4741mm |
| Lift Arm Clearance at Maximum Lift | 3902mm |
| Overall Length - Without Bucket | 8597mm |
| Tread Width | 8.4ft |
| Wheel Base | 3800mm |
| Width over Tires (Loaded) | 11.5ft |
| Operator Environment |
|
| On-board Technologies |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Monitoring System |
|
| Linkage |
|
| Operator Environment |
|
| On-board Technologies |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Monitoring System |
|
| Linkage |
|
| Additional Equipment |
|
| Special Configurations |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 982 , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
982