The Cat® 995 Wheel Loader meets your demand for greater productivity by delivering more — and using less. It gives you more payload, more power and more performance while using less fuel. So you can get more done in less time while reducing fuel usage. Introduced in 1990, the 994 was the top choice in its size class for over 25 years. The 995 builds on the success of the 994K model with the goal of achieving even higher efficiency and production. Compared to the 994K, the new 995 is up to 19% more efficient and up to 19% more productive, thanks to a higher rated payload, increase in hydraulic force and up to 13% reduction in hourly fuel consumption in Enhanced Eco Mode. It also offers an improved operator environment, with greater visibility and 50% more leg room, plus features that improve operator confidence while reducing fatigue.
| Engine Model | Cat® 3516E |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent |
| Engine Power - ISO 14396 | 1847HP |
| Gross Power - SAE J1995 | 1870HP |
| Net Power - SAE J1349 - Standard Ambient | 1739HP |
| Net Power - SAE J1349 - High Ambient | 1696HP |
| Bore | 6.7in |
| Stroke | 8.5in |
| Displacement | 4766in³ |
| Peak Torque - 1,200 rpm - SAE J1995 | 8549lb/ft |
| Torque Rise | 39% |
| Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
| Note (3) | The gross power advertised is with the fan at maximum speed. |
| Operating Weight - Standard | 540555lb |
| Bucket Capacity Range | 17.2-43.6 m3 (22.3-57 yd3) |
| Operating Weight - High Lift | 544457lb |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 60ton (US) |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | 50ton (US) |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | 55ton (US) |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | 50ton (US) |
| Note | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 4.6mile/h |
| Forward - 2 | 8mile/h |
| Forward - 3 | 13.6mile/h |
| Reverse - 1 | 5mile/h |
| Reverse - 2 | 8.8mile/h |
| Reverse - 3 | 14.9mile/h |
| Direct Drive - Forward 1 | Lock-up disables |
| Direct Drive - Forward 2 | 8.7mile/h |
| Direct Drive - Forward 3 | 15.2mile/h |
| Direct Drive - Reverse 1 | Lock-up disables |
| Direct Drive - Reverse 2 | 9.6mile/h |
| Direct Drive - Reverse 3 | 16.8mile/h |
| Note | Travel speeds based on 58/85-57 tires. |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Maximum Flow at 1,700 rpm Engine Speed | 541gal/min |
| Relief Valve Setting - Lift/Tilt | 5004psi |
| Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) |
| Pilot System | Open Loop and Pressure Reducing |
| Rack Back | 4.9s |
| Raise | 12.6s |
| Dump | 3.1s |
| Lower Float Down | 4.2s |
| Total Hydraulic Cycle Time - Empty Bucket | 23.5s |
| Fuel Tank - Standard | 856gal (US) |
| Fuel Tank - With 24 hr Attachment | 1414gal (US) |
| Cooling System | 138gal (US) |
| Engine Crankcase | 76gal (US) |
| Transmission | 110gal (US) |
| Differential - Final Drives - Front | 220gal (US) |
| Differential - Final Drives - Rear | 200gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | 270gal (US) |
| Hydraulic Tank - Steering and Braking | 100gal (US) |
| Oil Renewal System (ORS)* | 20gal (US) |
| Note | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 9° |
| Ambient Capability Hydraulically Driven Demand Fan - Standard | 109.4°F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 131°F |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 127.4°F |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 72dB(A) |
| Machine Sound Level (ISO 6395:2008) | 119dB(A) |
| Note | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 71dB(A) |
| Machine Sound Level (ISO 6395:2008) | 117dB(A) |
| Note | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in |
| Steering System - Circuit | Pilot, Load Sensing |
| Steering System - Pump | Piston, Variable Displacement |
| Total Steering Angle | 80 degrees |
| Steering Cycle Times - Low Idle | 7.6s |
| Steering Cycle Times - High Idle | 4.3s |
| B-Pin Height - Maximum Lift | 28.8ft |
| Clearance at Maximum Lift | 19.8ft |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | 21.9ft |
| Ground to Bumper Clearance | 4.4ft |
| Ground to Center of Axles | 6ft |
| Ground to Lower Hitch Clearance | 2.9ft |
| Ground to Top of Exhaust Stacks | 23.2ft |
| Ground to Top of Hood | 18.6ft |
| Ground to Top of ROPS | 23.4ft |
| Maximum Overall Height - Bucket Raised | 39.3ft |
| Maximum Overall Length | 64.6ft |
| Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | 59.5 degrees |
| Rack Back Angle - Carry | 47.7 degrees |
| Rack Back Angle - Ground Level | 39.7 degrees |
| Reach - Maximum Lift | 9.6ft |
| Rear Axle - Centerline to Bumper | 20.4ft |
| Tread Width | 14.1ft |
| Wheel Base | 22.3ft |
| Width - Over Tires - With Bulge | 18.8ft |
| B-Pin Height - Maximum Lift | 31.6ft |
| Clearance at Maximum Lift | 22.6ft |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Front Axle Centerline to Bucket Tip | 24.2ft |
| Ground to Bumper Clearance | 4.4ft |
| Ground to Center of Axles | 6ft |
| Ground to Lower Hitch Clearance | 2.9ft |
| Ground to Top of Exhaust Stacks | 23.2ft |
| Ground to Top of Hood | 18.6ft |
| Ground to Top of ROPS | 23.4ft |
| Maximum Overall Height - Bucket Raised | 42.1ft |
| Maximum Overall Length | 66.9ft |
| Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
| Rack Angle at Maximum Lift | 59.4 degrees |
| Rack Back Angle - Carry | 53.5 degrees |
| Rack Back Angle - Ground Level | 45 degrees |
| Reach - Maximum Lift | 9.4ft |
| Rear Axle - Centerline to Bumper | 20.4ft |
| Tread Width | 14.1ft |
| Wheel Base | 22.3ft |
| Width - Over Tires - With Bulge | 18.8ft |
| Brakes | ISO 3450:2011 |
| Power Train |
|
| Linkage |
|
| Electrical |
|
| Operator Environment |
|
| Safety |
|
| Machine Control And Guidance |
|
| Fuel Tank |
|
| Cooling |
|
| Service |
|
| Efficiency |
|
| Power Train |
|
| Linkage |
|
| Operator Environment |
|
| Safety |
|
| Cold Weather |
|
| Machine Control And Guidance |
|
| Fuel Tank |
|
| Cooling |
|
| Rims And Tires |
|
| Spare Rims |
|
| Service |
|
| Sound |
|
Share this Product
995 Wheel Loader