888-569-9216
Contact Us
our locations

Pleasant Grove

Stockton

Los Banos
Compact Wheel Loader

907

This unit includes a general purpose bucket, maintenance package, connectivity, remote monitoring and your own team of product experts from Holt of California

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine. Ask our sales representative about exact machine and attachment specifications for this unit.
Machines prices vary by included features. If you would like more information about the machine details please contact us today by clicking "Contact to Purchase".
Contact to Purchase Compare Products
The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine. Ask our sales representative about exact machine and attachment specifications for this unit.

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Compatible Attachments

3.05 m (10 ft) Straight Snow Push with rubber cutting edge
View details
PC306 High Flow Cold Planer
View details
BA118C Hydraulic Angle Broom
View details

Browse More Attachments

Engine

Maximum Gross Power 74.7HP
Engine Model Cat C2.8*
Maximum Engine Speed 2550 rpm
Maximum Gross Power - Rated Engine Speed 2400r/min
Maximum Gross Power - SAE J1995 74.7HP
Maximum Gross Power - ISO 14396 74.3HP
Maximum Gross Power - ISO 14396 (metric) 75.3mhp
Rated Net Power - Rated Engine Speed 2400r/min
Rated Net Power - SAE J1349 72.7HP
Rated Net Power - ISO 9249 72.1HP
Rated Net Power - 2,400 rpm - ISO 9249 (metric) 73.1mhp
Maximum Gross Torque - SAE J1995 222lb/ft
Maximum Gross Torque - ISO 14396 221lb/ft
Maximum Net Torque - SAE J1349 218lb/ft
Maximum Net Torque - ISO 9249 217lb/ft
Displacement 171in³
Bore 3.54in
Stroke 4.33in
Note *Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1) Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2) Net power advertised is the power available at the flywheel.
Note (3) #Maximum gross and net torque measured at 1,600 rpm.

Weights

Operating Weight 12765lb

Buckets

Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose 0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material 1.25-1.55 m³ (1.6-2.0 yd³)
Multi-Purpose 0.75-1.1 m³ (1.0-1.4 yd³)
Note Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1) Bucket capacities stated include BOCE, in line with ISO 7546.

Sustainability

Recyclability 93%

Service Refill Capacities

Fuel Tank 24Gal
Cooling System 3.2Gal
Engine Crankcase 2.3Gal
Axles - Front Center Differential 2.3Gal
Axles - Rear Center Differential 2.3Gal
Hydraulic System - Including Tank 17.8Gal
Hydraulic Tank 11.8Gal
Transmission 0.6Gal
Note No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Axles

Front Fixed (standard), Locking Differential (optional)
Rear Fixed (standard), Locking Differential (optional)
Note Oscillation of ±11 degrees via hitch between front and rear frames.

Steering

Steering Articulation Angle - Each Direction 39°
Maximum Flow - Steering Pump 12.3gal/min
Maximum Working Pressure - Steering Pump 3336psi
Steering Cycle Times – (full left to full right) – at High Idle 2.8s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep# 6mile/h
Forward and Reverse - Speed Range 1* 6mile/h
Forward and Reverse - Speed Range 2** - High Speed 10.5mile/h
Forward and Reverse - Speed Range 2** - Standard 12mile/h
Forward and Reverse - Speed Range 3*** 25mile/h
Note #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1) *Creep function not available in this gear or above.
Note (2) **Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3) ***Reverse is 30 km/h (19 mph).

Tires

Tire Size - Standard *405/70 R18 SPT9
Tire Size - Optional 405/70 R18 Powerloads
Tire Size - Optional (1) 340/80 R18 XMCL/Bibload
Tire Size - Optional (2) 340/80 R18 TRI 2
Tire Size - Optional (3) 40X14-20 TL, SM/TR
Tire Size - Optional 4 340/80 R18 Duraforce
Note *This tire has been used for all dimension, stability and performance data.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (1) Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Note (3) *Measurements were conducted with the cab doors and windows closed.
Note (4) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice) 3408psi
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow* 21gal/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow* 32gal/min
Main Relief - 2nd Auxiliary (4th slice) 3408psi
Main Relief - 2nd Auxiliary (4th slice) - Flow 12gal/min
Hydraulic Cycle Time - Rackback 2.2s
Hydraulic Cycle Time - Lift 5s
Hydraulic Cycle Time - Dump 1.6s
Hydraulic Cycle Time - Float Down 2.8s
Note * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab** 8.5ft
Height: Ground to Beacon** 9.08ft
Height: Ground Axle Center** 1.58ft
Height: Ground Clearance** 1ft
Length: Overall* 17.58ft
Length: Rear Axle to Bumper 4.58ft
Length: Hitch to Front Axle 3.58ft
Length: Wheel Base 7.08ft
Length: Front Axle to Front of Coupler 3.5ft
Clearance: Bucket at 45° * 8.25ft
Clearance: Load over Height** 9.5ft
Clearance: Level Bucket** 9.92ft
Height: Bucket Pin** 10.67ft
Height: Overall** 13.5ft
Reach: Bucket at 45° * 2.33ft
Carry Height: Bucket Pin 1.08ft
Dig Depth** 0.33in
Width: Bucket 6.75ft
Width: Tread Center 4.67ft
Turning Radius: Over Bucket 14.75ft
Width: Over Tires 6.07ft
Turning Radius: Outside of Tires 12.92ft
Turning Radius: Inside of Tires 6.75ft
Rack Angle at Full Lift 56°
Dump Angle at Full Lift 45°
Rack Angle at Carry 51°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 12689lb
Tipping Load - Straight - ISO 14397-1 † 9773lb
Tipping Load - Full Turn - ISO 14397-1 † 8235lb
Operating Weight: Carriage and Tines ^^ 12220lb
Tipping Load - Straight † 7807lb
Tipping Load - Full Turn † 6569lb
80% of Tip: Firm and Level EN474-3 †† 5255lb
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab 8.5ft
Height: Ground to Beacon** 9.08ft
Height: Ground Axle Center** 1.58ft
Height - Ground Clearance 1ft
Length - Overall with Bucket 18.17ft
Length: Rear Axle to Bumper 4.58ft
Length: Hitch to Front Axle 3.58ft
Length - Wheel Base 7.08ft
Length: Front Axle to Front of Coupler 4.33ft
Clearance - Bucket at 45° 7.83ft
Clearance: Load over Height** 9.5ft
Clearance - Level Bucket 9.92ft
Height - Bucket Pin 10.67ft
Height: Overall** 13.83ft
Reach - Bucket at 45° 2.67ft
Carry Height: Bucket Pin 1.17ft
Dig Depth 3in
Width - Bucket 6.75ft
Width - Tread Center 4.67ft
Turning Radius - Over Bucket 15ft
Width - Over Tires 6.08ft
Turning Radius: Outside of Tires 12.92ft
Turning Radius - Inside Tire 6.75ft
Rack Angle at Full Lift 51°
Dump Angle at Full Lift 50°
Rack Angle at Carry 46°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 12897lb
Tipping Load – Straight – ISO 14397-1 † 8653lb
Tipping Load – Full Turn – ISO 14397-1 † 7257lb
Operating Weight: Carriage and Tines ^^ 12414lb
Tipping Load - Straight † 7416lb
Tipping Load - Full Turn † 6266lb
80% of Tip: Firm and Level EN474-3 †† 5013lb
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

Standard Equipment

Other
  • Fenders, front and rear
  • Loader arm safety brace
  • Lockable, fuel cap, HVAC filters, nose cone
  • Ground level easy access daily service points
  • Machine lifting/tie down points
  • Scheduled Oil Sampling (S·O·S SM) ports, engine oil and hydraulic oil
  • Recovery hitch with pin
  • Paint, Electro-Coat primer, gloss topcoat
  • Lockable main and side engine enclosures
Hydraulics
  • Dead engine lower, lift valve, manual
  • Hydraulic pilot shut off switch, in cab
  • Hystat displacement pump, infinitely variable
  • Motor, single drive with dedicated implement and steering pumps
  • Electro-hydraulic, fully proportional controls
  • Demand cooling fan, hydraulically driven
  • Caterpillar HYDO™ Advanced 10 hydraulic oil
  • Implement valve, pressure compensated
  • Joystick, single lever, single auxiliary roller
  • Coupler/pin on attachment ready
  • Multi-function lift and tilt with loader arm float
Electrical
  • Lights, roading, front halogen
  • Alternator, 100 amp sealed
  • Service (Electronic Technician™)
  • Lights, rear stop and turn, LED
  • Battery, heavy duty, 12V, 90Ah and 1,000 CCA
  • Product Link™
  • Cab mounted fuse panel
  • Battery disconnect switch
Power Train
  • Axles, heavy duty, frame mounted with outboard planetary reduction
  • Closed circuit breather Coolant, extended life, –36° C (–33° F)
  • Fuel pump, priming (manual)/water separator/drain
  • Air cleaner, two stage filter, with in cab audio/visual indicator on display
  • Cat C2.8 engine
    –Diesel particulate filter (Fit for Life)
    –Fuel, diesel, ultra low or low Sulphur
    –Hydrostatic transmission, two speed, with inching function, “shift on the go”
    –Power train mode, hystat
  • U.S. EPA Tier 4 Final and EU Stage V emissions compliant
  • Drive shaft, sealed for life, universal joints Engine, auto idle shutdown, hibernation mode
  • Engine oil, ECO drain tap and hose
Operator Environment
  • Cab
    –Doors (2), fixed glass
    –Wipers, front and rear, full front coverage
    –Windshield, front single piece
    –Window, rear heated
    –Radio ready, speakers and wiring
    –Air vents, (4) screen, (7) directional
    –Heating, mechanical control unit
    –Sun visor, solid, front full width
    –Interior light (incandescent)
  • Joystick, seat mounted, standard multifunction
    –FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
    –Arm rest, padded right, multiple position vertical height
  • Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
  • ROPS/FOPS certified canopy/cab
    –12V power outlets, interior/exterior
    –Pedals, raised, foot, brake/inching, accelerator
    –Lever, parking brake
    –Cup holders (2)
    –CB radio clip, phone holder
    –Door release, internal (left and right)
    –Hook, large, coat and hard hat
    –Floormat, heavy duty, easy clean
    –Mirrors, (2) external breakaway, (1) internal
    –Operator station on isolation mounts
    –Steering wheel, spinner knob, horn in center
    –Seat belt, orange, retractable, 51 mm (2 in)
    –Storage, personal (trays [3], seat pocket)
    –Steering column, tilt adjusted
    –Column mounted multi function control: lights, roading, wipers, self canceling turn signals
    –Quick coupler switch, in cab
  • Display, analog and digital
    –Gauges (2), hydraulic oil, engine coolant
    –Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)

Optional Equipment

Operator Station
  • Seat belt options, multiple
  • Interior light, door activated
  • Joystick, FNR, twin auxiliary roller, differential lock, horn
  • Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
  • Radio, FM or digital audio broadcast
  • USB ports (2), interior
  • Air Conditioning, automatic temperature control (ATC)
  • Secondary display, front or rear view camera
  • Soft touch keypad options, 8 or 16 button
  • Sun visor, rear perforated
  • Seat packages; deluxe or premium
  • Doors, sliding windows (left and right)
  • Phone holder, spring loaded
  • Storage, lockable box or lockable cooled box
Power Train
  • Creep and throttle lock function
  • Fuel pump, priming, manual
  • Cold start – jacket water heater, bypass valve
  • Power train mode, utility (includes keypad)
  • 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
  • Antifreeze, extended life coolant, –50° C (–58° F)
Hydraulics
  • Caterpillar Bio HYDO Advanced hydraulic oil
  • Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
  • Reversing fan
  • Quick disconnect auxiliary hydraulics
  • Ride Control or load check valves
  • Connect under pressure and case drain
Electrical
  • Push to start
  • Work tool wiring harness, (3) in cab switches
  • Lighting packages, multiple; front, rear, engine bay (LED or HAL)
Other
  • Rotary sensors (snubbing, kickouts, parallel)
  • Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)

Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!

Compatible Attachments

T109 Hydraulic Trencher with rockfrost teeth
View details
2.4 m (8 ft) Snow Wing
View details
A23 Auger
View details

Browse More Attachments