The Cat 962 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended service intervals lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is built to meet your needs.
| Maximum Power - 2,100 rpm - ISO 14396 | 269HP |
| Engine Model | Cat C7.1 |
| Maximum Power - 2,100 rpm - ISO 14396 - Metric | 273HP |
| Maximum Net Torque - 1,400 rpm - ISO 9249 | 867ft·lbf |
| Maximum Net Power - 2,100 rpm - ISO 9249 | 251HP |
| Maximum Net Power - 2,100 rpm - ISO 9249 - Metric | 255mhp |
| Maximum Net Power - 2,100 rpm - SAE J1349 | 251HP |
| Maximum Gross Power - 2,100 rpm - SAE J1995 | 273HP |
| Maximum Gross Power - 2,100 rpm - SAE J1995 - Metric | 277mhp |
| Maximum Gross Torque - 1,400 rpm | 918ft·lbf |
| Maximum Gross Torque - 1,400 rpm - SAE J1995 | 926ft·lbf |
| Displacement | 427in³ |
| Note | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Operating Weight | 44469lb |
| Note | Weight based on a machine configuration with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open rear a |
| Forward - 1 | 4.3mile/h |
| Forward - 2 | 7.5mile/h |
| Forward - 3 | 12mile/h |
| Forward - 4 | 16mile/h |
| Forward - 5 | 24.5mile/h |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 7.5mile/h |
| Reverse - 3 | 16mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Breakout Force | 42489lbf |
| Static Tipping Load - Full 37° Turn - With Tire Deflection | 25869lb |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 27529lb |
| Note | For a machine configuration as defined under “Weight.” |
| Note (1) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Fuel Tank | 68.6gal (US) |
| DEF Tank | 4gal (US) |
| Cooling System | 14.3gal (US) |
| Crankcase | 5.5gal (US) |
| Transmission | 11.4gal (US) |
| Differential - Final Drives - Front | 11.4gal (US) |
| Differential - Final Drives - Rear | 11.4gal (US) |
| Hydraulic Tank | 25.6gal (US) |
| Implement System - Maximum Pump Output at 2,340 rpm | 85gal/min |
| Implement System - Maximum Operating Pressure | 4250psi |
| Hydraulic Cycle Time - Total | 9.4s |
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 23.83ft |
| Hinge Pin Height at Carry Height | 2.17ft |
| Hinge Pin Height at Maximum Lift | 13.83ft |
| Lift Arm Clearance at Maximum Lift | 11.33ft |
| Rack Back - Maximum Lift | 55° |
| Rack Back - Carry Height | 51° |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Ground Clearance | 1.08ft |
| Wheel Base | 10.92ft |
| Overall Length - Without Bucket | 25.17ft |
| Hinge Pin Height at Carry Height | 2.5ft |
| Hinge Pin Height at Maximum Lift | 14.75ft |
| Lift Arm Clearance at Maximum Lift | 11.83ft |
| Width over Tires (Loaded) | 9.33ft |
| Tread Width | 7ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69dB(A) |
| Note | ¹Operator Sound Pressure Level - Including countries that adopt the EU and UK Directives. |
| Note (1) | ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701 |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
| Note |
|
| Operator Environment |
|
| On-board Technologies |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Monitoring System |
|
| Linkage |
|
| Note |
|
| Operator Environment |
|
| On-board Technologies |
|
| Power Train |
|
| Hydraulics |
|
| Electrical |
|
| Linkage |
|
| Additional Equipment |
|
| Special Configurations |
|
Based on your application, comparisons may not be like for like, let us help you find what machine fits your needs!
For 962 , the Financing Calculator will calculate your estimated monthly payments, while the Affordability Calculator will help you determine what you can afford based on your desired monthly payment.
Financing Calculator Affordability Calculator
Share this Product
Cat | 962 Wheel Loader | Caterpillar